Diagnosys has a range of products dedicated to the test and fault finding of high value electronic systems which are used mainly in the Mass Transit, Defense and Industrial sectors.

Our products support the many and varied test techniques available today, so that you can be assured that your circuits and modules are tested thoroughly and faults are identified quickly, accurately and reliably.

Our products and solutions are developed with you to ensure they meet your exact requirements, whether its electronic fault finding, diagnostic testing, functional testing, conformal coating removal or electronic repair to keep your electronics working reliably and for longer.

What will I be doing?

Module & LRU Test

Functional testing is designed to rapidly test an LRU so that working units can be quickly identified and returned to operation and faulty LRUs can have the cause of the failure identified.

S500 systems are focussed on the functional test of LRUs or PCBs. Diagnostic testing is achieved by the use of a graphical guided probe to make measurements on internal networks of a circuit. From the result of the probing operations a test program can indicate the cause of a failure.

Suggested products to consider:

Read More…

Performance Test & Diagnostics

Designed to handle the test of digital, analog and mixed signal technology PCBs, the S790 Series 2 helps provide you with confidence your mission critical circuits are working to a known standard with high speed test capability. The application of different test techniques seamlessly in a test program maximise fault detection and identification helping to ensure the safe and reliable operation of your electronic systems.

Suggested products to consider:

Read More…

PCB Test and Fault Finding

The PinPoint range provides the scalable capability and performance you need to address latest and legacy technology while providing an effective PCB test and accurate diagnostic solution in a benchtop format. Designed to use mainly in-circuit test techniques applied through test clips and DTIs (Device Test Interfaces), the PinPoint range provides affordable and capable PCB test and diagnostic solutions.

S500 systems are focussed on the functional test of LRUs or PCBs from their edge connectors. Diagnostic testing is achieved by the use of a guided probe to make measurements and to prove the operation of electronic components on internal networks of the circuit. From the result of the probing the test program can indicate the cause of a failure to a component or small group of components.

S790 systems are focussed on the high speed precision test of PCBs used in mission or safety critical systems. By applying different test techniques seamlessly in a test program maximum fault detection can be achieved helping to ensure the reliable and safe operation of your critical circuits.

The AutoPoint DT and FaultFinder VIP provide rapid test development based on impedance signatures which are learnt from a known good circuit and then stored as a test program. The AutoPoint DT provides a flexible flying probe system which can be used stand-alone or integrated with a PinPoint system and the FaultFinder VIP provides a portable PCB test solution.

Suggested products to consider:

Read More…

Portable Troubleshooting

When you need an easy-to-use and portable troubleshooting tool for a PCB (CCA) or electronic assembly the FaultFinder VIP provides a solution which can be used in the workshop or outside.

The FaultFinder VIP uses impedance signatures acquired from a known good circuit to provide a test program which can then be used to troubleshoot other circuits.

Suggested products to consider:

Read More…

Reverse Schematic Systems

When you don’t have a schematic diagram for a PCB you will not be able to develop a reliable and accurate test program. Allowing you to create accurate schematic diagrams, the PinPoint range has the ability to reverse engineer the netlist and schematic diagram for a PCB from a physical board (PCB or CCA).

Suggested products to consider:

Read More…

Coating Removal

PCBs intended for use in tough or non-controlled environments are covered in a protective coating, often referred to as ‘conformal coating’. To ensure good electrical contact for reliable test and accurate fault identification this coating needs to be removed. The CRS8000 provides an effective and chemical-free method to achieve this removal.

Suggested products to consider:

Read More…

Test Data Integration

The ability to record, store and analyze test data is essential for the efficient operation of any electronic repair environment. The Test Result Server (TRS) collects and stores test data from test systems onto a central server allowing it to be updated with repair information, shared and analyzed.

Suggested products to consider:

Read More…

Tailored to the exact requirements of our customers, these electronic test solutions are delivering results.

To understand how they can be applied to your environment and what they can do for you

Contact Us TODAY!

Contact Us!

You can use this form to ask us any question!

We will answer you as soon as we can!

Name (*)
Mail (*)
Message (*)
FaLang translation system by Faboba